If you have a Serial ATA hard drive (SATA HDD) that contains the data you need for your laptop, or would like to transfer data from the computer to the drive, connect both devices is easy. Harde Schijf Herstellen is the restoration of damaged data on a storage medium such as a hard disk. This can be an important Excel spreadsheet, or a Word document. It may just prevent a document in which hours of work are suddenly damaged or missing.
You will need a special adapter called SATA adapter / USB that can be purchased at a store that sells computer electronics.
- Examine the cables that come with the adapter, SATA / USB. You should find a cable that has a USB 2.0 connector on both sides. Sometimes these cables come in two pieces and must be identified. You should also find a power cord with one end that can be connected to a wall outlet and the other at the entrance of a SATA HDD power supply.
- Connect the cable end SATA / USB to the corresponding input of your SATA hard drive. There will be a slot where you can submit.
- Plug the appropriate end of the power cable to the SATA hard drive. Again, there will be only one slot in which you can enter. Do not connect the other end to the power outlet yet.
- Turn on your laptop and insert the USB end of the USB / SATA cable into one of the USB ports. Wait until your computer boots up completely.
- Connect the power cable to the SATA HDD power on the wall and the device turns on. It should only take a few minutes for your computer to recognize the drive connected.
The most annoying form is when your computer is not functioning properly. For example, if your computer does not start and you will be dealing with error messages. You cannot possibly get your precious files. In this case, it is important not to try to solve the problem on your own. Turn off the computer, and do not restart. Further, you have to contact with data recovery specialist.
ICT-Winkel.be offers multiple services for IT such as, Be Domeinregistratie, Accounting software and Small business servers. Call at +32.3.772.22.36 and get Remote support service to repair computer.